Home
Up
Showroom
Gunsmith
About Us
Contact Us

 

 

 

 
 

Welcome to David's Gun Room

 

 

TC

 

 

Rifle 
     The G2 Contender rifle is a compact rifle boasting the same versatility and accuracy found with the G2 Contender pistol.

It features readily interchangeable 23" barrels, enabling the shooter to select from 5 different cartridge options; from 17 HMR and 22 LR Match, up to 30/30 Win or 45/70 Gov't.; even a 45 cal muzzleloading barrel. In addition, all of the 16¼" and 21" barrels made for the old style Contender will readily fit the new G2 frame. The high comb on the buttstock allows the shooter's eye to be in perfect alignment when using a scope.

Its versatility, with regards to selecting either rimfire or centerfire barrels makes it a multi-use rifle. It's an ideal plinker, small game and varmint rifle, and is one of the lightest hard-hitting deer rifles there is. It's as home in a trapper's pack basket as it is in deer camp.

...And As a “carry gun”, they don’t get any better. It will become your favorite in any of the seasons.

With the introduction of the G2 Contender rifle, also comes the introduction of a 209x45 muzzleloading barrel. Converting from centerfire to a muzzleloader is as simple as changing barrels and forends.

This much versatility in a 5½ lb package is hard to beat.

NEW FEATURES of the G2 Contender:

Easier to open.

More clearance between the grip and the trigger guard.

Incorporates a Patented automatic hammer block safety with built-in interlock.

Allows shooters to cock the hammer, lower it, and re-cock it without the need to break the action open again.

Some Images Are Clickable For Larger Views

23" Barrel Model, Blued Finish, 36 1/2" length, 5.4lbs
No.4244, 24" G2 Contender Rifle 209x45 Muzzleloader Barrel, blued finish.  Drilled and tapped for scope mount - Fiber optic sights installed.  With ramrod.  Requires a speical forend No.7622 with cut to allow insertion of ramrod.
23" Contender Rifle Barrel, blued finish.  Drilled and tapped for scope mount - no sights.
24" Contender Smoothbore 410 Ga. Barrel w/Vent Rib, blued finish.  Bead front sight. Screw in Full choke tube supplied.
No.8270, Blued Frame assembly, Walnut stock and forend; Barrels for the G2 Contender Rifle can be changed in only seconds by removing the forend and tapping ou the barrel/frame hinge pin.  All Contender barrels will fit; blued and stainless barrels are interchangeable.
By simply pulling up and back on the trigger guard spur - you can open the G2 Contender action to load and unload the chamber
G2 Contender Rifle Specifications
Action: Single shot, break open design (by use of trigger guard)
Barrel: Interchangeable by use of a removable barrel/frame hinge pin. Button rifled. Drilled & tapped for T/C scope mounts.
Trigger: Adjustable for overtravel.
Hammer: Wide grooves in hammer spur for positive grip. Equipped with external manual firing pin selector - allowing the shooter to use rimfire and centerfire barrels on the same frame.
 
Stock and Forend: Walnut buttstock and matching forend.
Weight: 5.4 lbs with 23" barrel.
Overall Length: 36¾" with 23" rifle barrel.
Finish: Blued Steel
Safety: Patented (Patent #5680722) automatic hammer block with bolt interlock.
Sights: None. Barrel drilled & tapped for scope mounts.

 
   

 

 
 

 

©Copyright 2002 - David's Gun Room - All Rights Reserved.